ALUMESS - Fixturing and palletizing system for CMM

>> Easy, rapid and economical

The ALUMESS fixturing and palletizing system consists of various elements which can be easily, quickly and economically mounted
to a precisely positioned reproducible clamping fixture.

>> Flexible

The system is mainly designed for flexible use on coordinate measuring machines CMM´s. Further areas of use are for the production of samples and prototypes, laser inscription, laser processing or as a mounting device.

>> Robust

The basic elements can be fixed directly underneath each other, making up a robust and strong connection. Optimal accessibility to
the point of measurement can be achieved, thanks to the space saving implementation of all construction elements.

>> Reproducible

Position holes in the pallets, plates, rails and angle plates as well as a wide range of support, positioning and stop elements enable a reproducible construction of any clamping fixture. This also means that only the constructed specific elements must be stored for re-use as required

  Grid pitch: 20 mm
  Grid hole diameter: Ø10 H8
  Clamping thread: M6 (M7)
  Basic plates
Grid hole diameter:
Ø14 H8
  Clamping thread: M10

>> Palletizable

The locating screws are used to fix the clamping pallets on the basic plate quickly and easily which is mounted onto a measuring machine. This reduces the preparation time to a minimum. Clamping fixtures are mounted onto the pallets outside the machine which greatly increases the efficiency. In addition to this the efficiency is increased ever more by mounting several pallets on a basic plate. This means that the fully equipped basic plates can be measured at night without the supervision of personnel.

The finish of the basic elements
Most of the basic elements are made out of high-strength aluminium which is anodized afterwards, the basic plates are hard-coated. The hard-coated finish of further elements is available upon request. Steel accessories are supplied in high quality, anticorrosion finish.

Planning and documentation
On request we have a CAD-library at our disposal for the computer supported planning and documentation of clamping fixtures.

Getting started
For quick start up with the ALUMESS-system we have various starter kits at our disposal which can be accustomed to your needs. We are also prepared to put together a kit specified
to the customer’s wishes. Please get in touch with us and request our brochures / catalogues. We would be happy to give you free technical advice

Example for construction



ALUMESS-Basic Starter Kits

Design and explanation of the system

Universal clamping fixture range as a starting kit on CNC-coordinate measuring machines and at the conventional measuring station.

The easy mounting of the elements by low tension bolts and adaptor bolts enables the rebuilding of the fixture on the base plate by using an Allen key within seconds.

The ALUMESS-Basic components can be easily combined with the ALUMESS clamping and palletizing system, if required.

  • Universal
  • Flexible
  • Modular
  • Compatible



Copyright @ 2016 Max Value Technology Co., Ltd.  All right reserved
261 Soi On-Nuch 17 yak 16, Sukhumvit 77 Rd., Suanluang, Bangkok 10250 Thailand.
Tel. : +66 (0) 2717-7199  Fax. : +66 (0) 2300-2272  E-mail :